April 30th, 2024, 11:15 PM
|
#1 (permalink)
|
|
Junior Member
- Join Date:
- Feb 2022
- Posts:
- 1
- Liked:
- 0 times
|
2012 Interchange MD8 Gas Conveyor Dryer/Oven for Screen Printing
State/Province:
Arizona
City:
Phoenix
WILL BE AVAILABLE EARLY JUNE
8ft tunnel, 16ft infeed, 8ft outfeed. Infeed and outfeed can be shortened or reconfigured in increments of 4ft.
Runs great. Selling because we're getting a split-belt dryer.
We've had it almost completely rebuilt to be extremely reliable. Spent almost as much on the rebuild as we did on the dryer.
250,000 BTUs Rated Burner
3 HP Motor/4500CFM
Natural gas but can use propane too. 6 to 12” WC (Water Column) 3/4”
NPT Electric: 3 Phase, 208—230 Volt, 15 Amp
Has two hoods we had built on each end of the tunnel in addition to the main exhaust that can be hooked up to an exhaust to keep shop temperatures down.
48" belt in good shape
Purchased lightly used in 2015 for $8K and put ~$6K into the rebuild, selling for $7K
Currently lists for $35K new with the extended infeed and outfeed
Listed used without extensions for $12,500 on screenprintsource
Pickup only in downtown Phoenix
Last edited by DanAcme; May 1st, 2024 at 12:03 PM.
|
|
|
|
