2 Embroidery machines for sale OHIO

By Terry4 on Sep. 02, 2011
Terry4's picture
United States

One is the Brother PR 1000. This is only 4 months old! My health and a family situation are forcing me to sell out.

Main Features:

* 10-needle embroidery machine with new 10 Thread Eyelet Threading System eliminates tangles and and maintains Consistent Tension. Perfect tension on all 10 needles

* 2 each of all the hoops

* Extra large 7 7/8 x 11 3/4
* Large 5 1/8 x 7 1/8
* Medium 4 x 4
* Small 1 1/2 x 2 3/8
*JUMBO HOOP 15"X15" {MACHINE WILL SPLIT A LARGE DESIGN FOR YOU}
* 2 hat hoops, driver, and mounting frame (wide hat hoops,14"x60mm tall}

* Large, full color 4.3" x 7.2" HD touch screen by Sharp Corporation

* Enhanced InnovEye® technology and Snowman Embroidery Positioning Marker from Quattro NV6000D: built-in camera above the needle that is sewing. Precise positioning of your center and starting point is easy with the new 200% actual size zoom and visual grid function. Use the InnovEye to view any thread breakage point, then select the grid function to determine the spot to restart your embroidery.

* NEW InnovaChrome™ LED Thread Color System simplifies thread color setup and provides status cues: LED Lights below each of 10 spool pins on the thread stand are color coded to match 10 of up to 300 thread colors shown on the screen. So you can never mismatch thread spool color indicated on the main control panel. These lights also flash to advise of thread color change, thread breakage, design completion, and empty status.

* Adjust individual needle speed from 400 to 1000 Stitches Per Minute.
* 10 Needle Auto Threading from Any Screen
* 10 Full Spectrum LED Lights above needles has the brightness of 35 light bulbs and eliminates shadows.
* 10 Thread Colors on Lighted Spool Stand
* Extra Large 30x15" Extension Work Table
* 110 Built-in Exclusive Embroidery Designs.
* 28 size-adjustable fonts, Alphabets and Monogram Styles
* Color palette, 300 colors for visual indication of correct thread color
* Link up to four PR-1000 or upgraded PR-650 machines to one computer
* Queue up to 100 designs
* Built-in memory: 1.7MB; save up to 500,000 stitches to memory
* Built-in tutorial movies, diagrams and instructions

This has very low hours on it. Needing to sell!
..............................................................................................
The second one is a Babylock BMP6.
This runs nicely and does Beautiful work. Great condition. I didn't use alot because of health.
Hours: 2693
Stitches: 84961784
Comes with 2 hoops each of:
*Extra large 7 7/8 x 11 3/4
*Large 5 1/8 x 7 1/8
*Medium 4 x 4
*Small 1 1/2 x 2 3/8
*2 hat hoops, driver, and mounting frame regular ones 50mm tall
*Physical upgrade comes with it, but is not yet installed. It will allow you to do the taller hat hoops 60mm & cylinder hoops.
*Manual
*tool box with all needed tools
*new bobbin case in machine
*nice metal BMP6 table

$16,300.00 OBO CASH for both!! Must be picked up here. They are still hooked up to show you how it works. Great machines!

I would sell separately! Feel free to ask.

Thank you.

Embroidery
—

It never hurts to be nice!

There are 62 Comments

Terry4's picture
Submitted by Terry4 on Fri, 09/02/2011 - 11:49

I am a motivated seller! Will sell as a pair, or separately. I just put an ad in our local paper, that runs for the next 2 days. Just saying.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Sun, 09/04/2011 - 08:50

We've decided that we might ship these. We've never shipped something so heavy, but the one had been shipped to us via UPS, back when we got it. It arrived safely, so we could do the same. Buyer pays for the shipping. It would be insured. In the U.S. only!

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Mon, 09/05/2011 - 09:51

Have a nice & safe Labor Day all!

Feel free to make an offer on both or one of these machines. I must sell them.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Wed, 09/07/2011 - 10:29

I was looking through the accessories to these machines, and forgot that I have a brand new, never used, support table for the Babylock BMP6. It is being added to the list!

Come on guys! These are some nice, well kept machines. I am motivated to sell, so will be happy to take offers.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Thu, 09/08/2011 - 10:37

These are still available. Please feel free to make an offer {privately} on both or one of them.

If you have asked something about these, be asured that I did reply to you. I ask that when you get my reply, let me know you got it. This is getting confusing, wondering who got what.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Fri, 09/09/2011 - 10:08

Still available.

We would be happy to omitt things, like the metal stand or hat hoops, etc. If there's anything you don't need with these, we can take offers in such a way. These need to find a new home! I will miss them, but need the money.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Mon, 09/12/2011 - 22:53

The Babylock BMP6 has been Sold!

But the Brother PR 1000 is still available. It has more accessories than a dealer would give.
Asking $13,200.00 or make an offer, privately please!

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Tue, 09/13/2011 - 16:40

The Brother PR 1000, 10 needle embroidery machine, is the only machine left for sale.

We are asking $13,200. or make an offer! This is only 4 months old! See full info above.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Fri, 09/16/2011 - 09:19

Ok. I have reduced this to $13000. This is WAY below what these and all these extras go for now. This is only 4 months old, and they've gone up that quickly. It includes alot of extras that do not normally come with it. I would ship this, at the buyer's cost. I would prefer it to be picked up, here in Ohio. But would ship.

Thanks.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Sat, 09/17/2011 - 19:32

I thought I should verify about the JUMBO hoop. It is 360mmx360mm. I have been asked a couple of times, so here it is.

I would take reasonable offers, for all this.

Would prefer you pick it up here in Ohio. We could ship at buyers cost, via UPS.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Fri, 10/07/2011 - 13:01

Ok. We are really needing this gone. I am selling it because of health and family issues. Like alot of families, we lost our jobs. It appears I am not going to get near what I paid for it, so how about a new price??

$11,000.00 cash, or make an offer. Make any offers privately! Would prefer this to be picked up in OHIO. You'd be surprised at what I might take for this.

It's in great, new condition, only 5 months old, 74 hours on it. Check the 1st page to see what comes with it. There's a typo there though. I only got 1 hat hoop with it.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Sun, 10/09/2011 - 09:21

Ok, this must go. Not a thing wrong with it, we're just needing the money.

Check the 1st page of this thread for all the goodies that come with it. There is a typo there though. I only got 1 hat hoop with it. Other than that, it's ready to use.

New and about last price.

$10,500 or you make an offer. Would like this picked up in Ohio.

You can PM or email me if you need more information.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Sun, 10/09/2011 - 14:28

dkube2004 wrote:
How much for the Babylock?

As it says a few posts back, the babylock is sold. Thanks. Check your messages for a reply to your email.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Mon, 10/10/2011 - 12:29

I appreciate the inquiries, but please, go to the 1st page of this thread for the photo and desciption. It is only 5 months old, nothing wron with it. Just needing the money.

So we have decreased the price to $10,500.00 or you make an offer. Needs picked up here in Ohio. Prefer cash. Would take a bank cashier's check but the machine stays here until the check completely clears my bank.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Thu, 10/13/2011 - 11:58

rkcowherd wrote:
Do you still have the Brother machine??

Yes I do. If you're interested feel free to send me a private message.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Sat, 10/15/2011 - 12:52

Still available folks!

I would appreciate if you ask me about this machine, PR1000, that you reply when I reply. Makes me wonder if you got my reply or not.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Mon, 10/17/2011 - 08:53

For those of you that are asking, I only have the Brother PR 1000 left for sale. Please feel free to look back the posts for more info. The first page has what comes with it.

It is now priced at $10,500.00, to serious buyers only! I will not sell any of the hoops, etc. They go WITH the machine, at the price mentioned.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Tue, 10/18/2011 - 12:27

One machine left. The Brother PR 1000. $10,500.00. It's only 5 months old and low hours. I need to get this sold soon!

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Thu, 10/20/2011 - 09:22

I thought I had posted a photo, but can't find it. Here you go, those that have asked. Hope this works.

Thank you.

It never hurts to be nice!
Terry4's picture
Submitted by Terry4 on Sun, 10/30/2011 - 12:38

Price Greatly Reduced!!

I need to sell this soon.

I will take $10,000. even cash. Includes all the access., stand, hat hoop, etc.

Needs picked up in Ohio.

Thank you.
Terry

It never hurts to be nice!

Pages

2024 © DigitSmith | Terms and Conditions | Privacy Policy | Contact