Misc. Fast Frames for Tajima/SWF/Brother

Ok, I have 4 different fast frames that will fit any Tajima, SWF, or Brother machine with a 360mm sewing field width. If you are unsure of the sewing field width of your machine, measure your tubular hoops from the outside edge of one bracket to the outside edge of the other. It should be just under 14".

I have 1 MONO, and it has a sew area of 2" wide by 4" deep. This frame was designed for sewing on denim shirts that have a pocket width of 5" or more. Woven fabric doesn't have the give that jersey knit does so you need room for the bobbin case.

I have 1 BASIC, and it has two sew areas on this model. You are able to sew on cap sides, backs, bills and just about anyplace you can stick down flat. It also works very well on bucket hats, cuffs of sleeves, collar tips, tops of gym bags, turtle necks, some bag pockets and a lot more.

I have 2 of the SLEEVE FRAMEs. Original design of 3" wide by 11" long. This frame is used for a multitude of items, starting with being able to sew down the sleeve of a shirt, coat or pant leg. It also makes sewing on lunch bag, Christmas socks and the fronts of button down shirts ( hoop it once and sew in between the button holes)

All of these items are used but in great condition. No issues with them whatsoever.

I would like to get $50 each for the BASIC and MONO, and $75 for the SLEEVE FRAME. There will be a shipping charge.

I am willing to sell separately if necessary.

Here is my contact info:

Travis McMinn
573-866-3676
travis@stitchitintl.com