5 Melco Amaya Embroidery Machines - GOOD DEAL!

By ResolutionAP on Jan. 04, 2016
Weatherford, OK, United States

We have 5 Melco Amaya XT Embroidery Machines.

We have two, Gray, 2010 Models - Both are operational except for an alignment issue that just happened last week by user error. Melco tech said would take 1-2 hours to fix, no parts needed. However, our Melco tech quit working for melco and moved and now closest tech is 4 hours away. Otherwise we would have already paid to have them back up and running.

Other machines are 3 "big red" Melco machines - 2005 models. These need various repairs, one needs a motor, another needs a couple motors, and one needs a motherboard - per Melco Tech.

We are asking the following:

Whole shop setup - 5 machines (2 XT's, 3 reds), lots of hoops of every size, thread, computer to run machines software to run machines, design shop software, network switch to run machines with cabling, 5 hat drivers with hat hoops and hat hooping setup, all the tools we have, backing, bobbins, Pre-Digitized Embroidery files purchased on CDs with catalogs ($1,500) etc.

Whole setup: $14,500

Willing to piece out as follows:

2 XT's and one red - with whole shop - $12,500

2 XT's with the whole shop - $11,500

3 reds by themselves with hat drivers - $3,500

Serious parties only please, we aren't one of those shops that is in a bind to sell these, we aren't closing, in a financial bind, or have lost business - we are selling because we no longer do in house embroidery and would like to utilize the space instead of sticking machines in storage. If you are making an offer, please make it reasonable and don't waste our time, these are good machines, and if you have access to a tech, they are up and running in no time. I've even offered to get estimates from techs in your area because I know what is wrong with them, and I can make negotiations on price depending upon what cost to repair is.

Buyer is responsible for arranging shipment.

We take credit cards, bank transfers, etc. - We will not owner finance, if you don't have access to the money, you probably shouldn't be buying equipment.

If you need references to ensure that we aren't scammers in foreign countries and do legit business, and that these are legit machines - ask, we have plenty!

Embroidery

There are 9 Comments

Submitted by eqused01 on Tue, 01/12/2016 - 17:58

ResolutionAP wrote:
We have 5 Melco Amaya XT Embroidery Machines.

We have two, Gray, 2010 Models - Both fully operational -

We are asking $6,500/ea, or $11,000 for the pair. We will also throw in hoops of all sizes, different attachments, frames, thread, software, etc.

Three of them are 2005, Red Models, and need a little work to get operational. We were told the following by our Melco Tech:

1. - Needs Motherboard ($800)
2. - Needs X Motor ($175)
3. - Needs Y Motor ($175)

Each of these machines we would let go for $1400/ea, or $4000 for all three.

For the entire lot of 5 machines - $15,000

We will also throw in ALL of our hoops, and slimline attachment, all other attachments, all thread, all tooling, bobbins, software (design shop and amaya run), dongles, networking hubs and cables, AND the computer that operates them.

We will also throw in ALL of our embroidery files that we have purchased (numerous cds with pre-digitized designs)

Anyone who knows embroidery machines knows that this is a really good deal - it is a complete shop and with a minimal investment you can have 5 good embroidery machines capable of paying for themselves in a month or less.

Reason for sale: We outsource all of our embroidery and we no longer need these machines.

Buyer is responsible for arranging shipment.

We take credit cards, bank transfers, etc.

What version and how many copies of the Design Shop software and Operating software do you have?

Submitted by ResolutionAP on Tue, 02/16/2016 - 21:52

Yes we still have machines - price is reduced - we don't need to sell these we need the space and want to utilize the room they are in:

Whole shop setup - 5 machines (2 XT's, 3 reds), lots of hoops of every size, thread, computer to run machines software to run machines, design shop software, network switch to run machines, 5 hat drivers with hat hoops, all the tools we have, backing, etc.

Lots of tire kicking going on, we would have all 5 of these machines up and running adn asking way more if we had a Melco tech in our area. Our tech quit working for Melco and now the closest one is Jonno in Dallas. I've even offered to pay to get the XT's fixed up if someone had a tech because I know it is a VERY MINOR alignment that needs done. This is a really good deal if anyone knows about these machines and what we are selling with them.

Whole setup: $14,500

Will piece out as follows:

2 XT's and one red - with whole shop - $12,500

2 XT's with the whole shop - $11,500

3 reds by themselves with hat drivers - $3,500

Serious parties only please, we aren't one of those shops that is in a bind to sell these - we are selling because we no longer do in house embroidery and would like to utilize the space instead of sticking machines in storage.

2025 © DigitSmith | Terms and Conditions | Privacy Policy | Contact