Wanted: Platens for Freedom/Javalin Workhorse

By RZRevo on Mar. 22, 2017
Omaha, NE, United States

Im looking for 8 Adult sleeve platens and 8 kid platens for a Workhorse 6/8 auto press. I have a 2006 freedom, but I believe the Javalin pattets are the same. Prefer the quick release type, but I would consider the bolt type.
Thanks,
Steve@shopRedZone.com

Screen Printing

There are 8 Comments

Submitted by senciz on Wed, 03/22/2017 - 23:29

I was looking for sleeve platens for my freedom until i saw how much they were. I found a different solution. I bought aluminum stock from ebay and had a metal shop cut it down and counter sink some holes in the appropriate place. Now all i do is take off the shirt platen and mount those in its place. Probably cost me $250. 5-10 minutes of changing over from one to the other but it was worth it. I also made youth platens the same way. If you are interested let me know and i can send you pictures and link the ebay store with the correct material

Submitted by Arnoldprints on Mon, 03/27/2017 - 00:36

senciz wrote:
I was looking for sleeve platens for my freedom until i saw how much they were. I found a different solution. I bought aluminum stock from ebay and had a metal shop cut it down and counter sink some holes in the appropriate place. Now all i do is take off the shirt platen and mount those in its place. Probably cost me $250. 5-10 minutes of changing over from one to the other but it was worth it. I also made youth platens the same way. If you are interested let me know and i can send you pictures and link the ebay store with the correct material

Send me pictures of your pallets please.

https://t.me/pump_upp

Submitted by dhd on Wed, 09/06/2017 - 19:49

quick release and non quick release are different, they don't fit the same bracket. From what I've been told if you have the quick release then M&R will fit along with the workhorse ones....just passing on info...

2024 © DigitSmith | Terms and Conditions | Privacy Policy | Contact