Flatbed Laminator Aplicator Hot/Cold LED Signs & Graphics

This Flatbed Laminator is like brand new. It was used only few times to try it out. The working area is 63" x 120".

- Easy to learn, no special skills required
- Do not need professional operators
- High Productivity
- This table can finish all the jobs in a third of time result in a perfect effect
- Saving lots of time
- Consistent high quality

The flatbed laminator comes with longevity oil-free air compressor

This Flatbed Laminator can be used for mounting, laminating, pre-masking or just as a working table
1) MOUNTING
One operator could be competent; to large digital printing or adhesive sticker mounting onto many kinds of base material, like acrylic, foam board, corrugated plate, metal board, banner and glass. This workstation provides you the full-scale positioning control and guarantee the finishing surface bubble-free and crease-free.
2) LAMINATING ( HOT/COLD)
Fit to cold laminating digital printing and post-processing, this workstation could max limit the waste of material by using the volumed or individual cold laminating film
3) PRE-MASKING
One operator can transfer the large size masking tape onto media, also allow to cut off the vinyl from installing tape roll.
4) WORKING TABLE
No need extra operating table. This workstation will replace your old operating table. The LED lighting system will provide a great support for your regular working.

FEATURES
- LED table lighting system
- Over-sized mounting
- Fit to trafic sign making
- Tension media feeding system

Operation type : Manual
Max temperature : room - 140 degrees F
Control panel : LED lighting, hot/cold laminating switch, setting temperature
Feet wheel : Feet shell with leveling adjust
Preheating : 10 - 15 min
Heating : Infrared
Roller upgrade : Air cylinder
Max thickness : 2 inch

Options:
PVC cutting mat
Media roll holder for side pockets