Priced to Sell: Freedom Auto|2 Flashbacks / Manual Press / Newmans / Exposure Unit

We've upgraded our shop and need to clear out the old. We'd like it gone so it's priced to move. All available for inspection anytime in Mooresville, NC. (15 Miles north of Charlotte, NC). Call/Text to Seven Zero Four Six Five Eight Five Five Seven Seven or email ben at brandspeed dot us.

All items below are ready for pickup now with the exception of the Freedom Press. It will be available the first week of December. It's currently being used in our operation as we wait for arrival of our new press.

23 x 31 Newman Roller Frames - $15 Each
Newman Roller Master Table - $800
Workhorse Point 1000 Exposure Unit $950
Workhorse Powerhouse 3011 Dryer - $2000
Workhorse Manual Press 6/6 - $1,000
2009 Workhorse Freedom Automatic 6/8 with 2 Flashbacks - $9,500

Details:

23 x 31 Newman Roller Frames - $15 Each
Will not separate frames. Must buy all.
MZX -Approximately 90 ; M3 - Approximately 40

Newman Roller Master Table for 23 x 31 - $800
In good working order. Also includes the giant wrench from Newman. We'll also throw in the correct sockets and ratchet for the frames.

Workhorse Point 1000 Exposure Unit - $950
Used until 2 years ago and then kept as a backup. Is in proper working order but could use a new blanket as this one has been patched. It looks pretty rough but is better in person. We originally placed it in our shop and then built in some walls for the dark room. Didn't think about getting the unit out so we beat it up pretty good trying to get it back out the door last week. The wheels on the bottom probably need to be removed. A little TLC is all it needs. - Price new $2,950

Workhorse Powerhouse 3011 Dryer - $2000

30" Belt x 11' long. 4' chamber - 220V Single Phase - We bought this dryer used in 2009 and it's been a daily operator ever since. Well maintained in a spotless shop environment. Since purchased we've taken good care of it. Replaced the belt motor and gears every couple years. We just did it again a couple months ago. We installed the element conversion kit so it can now run on Workhorse's new bulbs. We did replace a few bulbs a couple months ago but believe we may need to replace a couple more. We had more out than we thought and did not order enough. We replaced the digital readout panel. It was used daily up until our new replacement arrived a week ago.

Workhorse Manual Press 6/6 - $1500
Used in production until we replaced about 3 years ago. Then it was cleaned, dissembled and put in our storage container. We had a tech look at it before we took it apart. They said it needed a little work to get everything dialed in but the unit is an absolute tank. Have extra platens and all sizes that could be salvaged. Our tech said if we would put $100 in parts and $400 in labor it would easily be worth $2500 or more.

2009 Workhorse Freedom Automatic 6/8 with 2 Flashbacks - Includes 2 sets of V squeegees, Adult Platens, Youth Platens, Sleeve Pallets - $9,500 - AVAILABLE FOR PICK UP APPROX FIRST WEEK OF DECEMBER
We purchased this press new in 2010 and have used daily ever since. it has been well maintained by our staff and has had routine maintenance by a Workhorse technician annually. We would highly recommend having this press assembled and installed by our Workhorse tech. We can connect you with him. Currently in operation today. We are expecting our new press to arrive December 1. At that time we will disassemble this machine and have it ready to go. Control box runs on 110v and each flashback required 220v. All single phase.