Inbro RSC-1201 Embroidery Machine

INBRO USA $9,500.00

THESE MACHINES ARE TRULY ONE OF A KIND AND CANNOT BE SURPASSED. THE POINT BEHIND THESE MACHINES IS TO ELIMINATE THE OPERATOR AS MUCH AS POSSIBLE. THIS MACHINE AUTOMATICALLY THREADS ITSELF AND EVEN WHEN IT BREAKS A THREAD IT WILL BACK UP AND RE-THREAD AND START SEWING AGAIN WITHOUT THE OPERATOR EVER HAVING TO TOUCH THE MACHINE.

THIS MACHINE IS A INBRO USA DEMO. IT HAS ONLY BEEN USED FOR SHOWS AND IN-HOUSE DEMOS. TAKE THIS CHANCE TO SAVE OVER $4,000.00.
THE MACHINE WILL COME WITH A YEAR WARRANTY AND THE FOLLOWING:
SPECTRUM FULL DIGITIZING PROGRAM
MACHINE STAND
COLOR MONITOR
12 FRAMES OF 6 DIFFERENT SIZES: 9, 12, 15 AND 18CM ROUND HOOPS ALSO 12 x12 AND 16 x14 SQUARE HOOPS
CAP DRIVER SYSTEM AND 2 FRAMES THAT ALLOW YOU TO SEW EAR TO EAR AND TOP AND BOTTOM
LASER POINT SYSTEM FOR PINPOINT TRACING AND ALIGNMENT

Outstanding embroidery Inbro's machines can operate/analyze in software mode.
Repeat Function 1design can be repeated off the X or Y axis. This application is ideal for patch embroidery or repetitive embroidery requirements.
Built-in a floppy disk drive Inbros's machine allows for quick design through a built-in 2 HD floppy disk drive. Also included is a 9 pin serial port for direct interface.
Interactive operation system The LCD displays an interactive menu for operating the machines so that even the beginners can operate this machine easily. System upgrades can be installed by the disk drive.
Large memory capacity Standard memory of 2,000,000 stitches can be store up to 200 designs(option : expandable to 10,000,000).
Large LCD display Monitor embroidery position with the LCD display that shows operation information (speed, location of the head, design information, available memory remaining, etc.)
Moving without stitching Inbro's machines can perform moving forward and backward without stitching.
Manual / Automatic off-set function Frame out positioning for applique is built-in. Default settings allow you to move the frame out for inspection or adding appiques/embellishments is very easy. If you select automatic offset location in the set up mode, you can return to the offset location automatically after the completion of the embroidery.
Set the embroidery limit The user can set the embroidery limit. This allows the user to set a stop if the embroidery gets to close to the hoop. This feature prevents unnecessary damage to the embroidery hoop and possible damage to the machine.
Adoption of High resolution color LCD monitor
6.4 inch high resolution color LCD monitor displays all set up menu and operation information so that even the beginner can operate this machine easily. In addition, as the LCD monitor shows real-time the selected design's embroidery progress status, anyone can visually check the status easily.
THE MACHINE CAN BE SHIPPED BY FREIGHT OR CAN BE PICKED UP AT LOCATION IN TEXAS.
CONTACT 469-877-0587