By jonbravado on
Jan. 29, 2024
Lexington, SC
United States
BARUDAN BENSME-ZN-15
15 HEAD / 9 NEEDLE - FLATS ONLY - TONS OF HOOPS + EXTRA PARTS.
MACHINE WAS REBUILT BY SHURKE AND ASSOCIATES WHEN WE BOUGHT SOME YEARS AGO - MOST HEADS WERE RUNNING FINE BEFORE WE TOOK IT OFFLINE. NEEDS A FEW CHEAP PARTS TO GET ALL 15 HEADS RUNNING. MOST HEADS WERE WORKING FINE WHEN WE TOOK OFFLINE. WOULD BE A GREAT MACHINE FOR PARTS - POWERSUPPLY, HOOKS, AUTOMAT (NEW SCREEN + USB - NOT INSTALLED BUT COME WITH MACHINE) PROBABLY 5K WORTH OF HARD-TO-FIND PARTS. BUT A GOOD FIXER-UPPER TO RUN 15 FLATS AT A TIME.
$2,000 OBO - NEED TO MAKE ROOM IN THE WAREHOUSE - THANK YOU!
There are 6 Comments
Re: Barudan 15 Head Embroidery Machine
What is the total length of this machine?
Re: Barudan 15 Head Embroidery Machine
about 24 feet - 4500 lbs (ish) - we had her for a uniform client and she ran great for years. She just needs to be lubed and run. probably 300 bucks of parts would get all heads back to normal.
Re: Barudan 15 Head Embroidery Machine
is this machine cap capable with the correct hoops and cap drivers?
Re: Barudan 15 Head Embroidery Machine
flats only - it's drilled for cap gear, but doesn't have any cap drivers or hoops. It comes with a wide assortment of flat hoops.
Re: Barudan 15 Head Embroidery Machine
$1,500 - need to make room. Great parts machine, or minimal work to have a 15 head machine for uniforms or flats.
Re: Barudan 15 Head Embroidery Machine
Had a few interested parties but no deposit yet - need it gone. Thanks!