Brown Single Phase Quartz Flash Cures

By danlilsade Verified Vendor on Feb. 17, 2015
Camden, SC, United States

15 Quartz Flash Cures for Manual or Automatic presses. These are 4 & 5 Quartz Bulb with Forced Air units with 16” x 18” or 16” x 24” heated areas respectively. All are 208/240v Single Phase recommended breaker is 35 Amps.

These operate from a Foot Pedal or Proximity Switch with a flip of the selector switch. I will take $1,500.00 each for the small ones and $1,800.00 each for the large ones, the freight and crate would need to be quoted based on the quantity. These are lightly used 2-3 year old units, each will be completely checked out, cleaned and warranted to be 100% functional.

Here is a link to the website for these: http://brownmfg.net/p/111/quartzair-flash-dryer

Screen Printing
—

Seritech Inc.

ch54panel@yahoo.com

There are 7 Comments

Submitted by danlilsade on Tue, 03/03/2015 - 10:23

Argh, the more I look at the web site for these the less I know. After careful measurements I come up with these numbers:

The small units Model # QF1618F are (top of first reflector to bottom of last reflector) to bulb filament width measures 16" wide x 18.5" long.

The large units Model # QF1624F&S are (top of first reflector to bottom of last reflector) to bulb filament measurements 16" wide x 23.5" long. Note: I say F&S is the model number on these because these have both foot pedal and motion sensor triggers.

Brown subtracts the 1/2" from the small one's true length (16" x 18.5") and the large is actually 1/2" smaller area than they say it is (16" x 23.5"). of course if you get these high enough from the substrate and are willing to wait these will flash a larger area anyway.

Is this clear?

Seritech Inc.

ch54panel@yahoo.com

2025 © DigitSmith | Terms and Conditions | Privacy Policy | Contact