LED FX Exposure unit that is approximately 4 years old. Bought new from ryonet. It has been converted to CTS; however, the original glass is still included.
There was a defect in early saati led models that caused 1/2 the led lights to fail due to the chip overheating. 1/2 the LED lights still work and it still can expose screens. We were still exposing sim process water based jobs with it but now have a 2nd unit with this one serving as a backup.
Everything else is still functional. The rubbing marks inside of the unit was from a spray foam can that someone left inside from the fabrication facility which rolled around during shipping.
A replacement chip can be purchased for ~$1200 from a Saati supplier.
It's sitting on the original freight skids, I believe I have the roller wheels still in a bag somewhere.
$700, pickup only.
There are 2 Comments
Re: LED FX Exposure Unit
Ok, here is an update. Someone was interested in the unit so I plugged it in to test before we setup an appointment for it to be viewed. The lights are not at full brightness so it won't expose a screen. It was working when I last used it about 1.5 months ago.
You are welcome to make an offer in it's now updated condition. It will either need a new chip, new bulb or will make a good shell to for a DIY unit. Vaccum and everything else works.
Re: LED FX Exposure Unit
Interested in selling just the tablet?