USB Reader Not Working

By inkimprints on Jan. 03, 2023

I've got a TFHX-IIC1504 machine and when I turn it on I get the 3D6 Error Code. So far what I've done is contacted Hirsch and they have sent the file for the system to be loaded back onto the machine along with instructions.

I have put the system on several usb sticks and even different sizes and formats and the machine will still read a B01 Error that it can't read the stick.

I spoke with a tech about this and they have mentioned in the past they have run into an issue where they couldn't get the machine to read a software install from USB but had to go back to a floppy drive to re load the software. I don't have the floppy drive and neither does the company locally I bought the machine from.

Does anybody have a floppy drive for a HX Tajima machine they would be willing to either sell or loan? I would pay shipping both ways on loan or would purchase the drive to see if that works.

My hopes are this does the trick and it is not the CPU.

thanks in advanced!

Submitted by dgeorge on Wed, 01/04/2023 - 12:03

If your USB emulator is Richpeace you must create an image from software disk.
Put this image to USB stick and install.
On USB stick only software disk image.
I did this many times.

If your USB emulator is another brad,I don t know.
But you can try the same ,will not explode nothing.

I have an YE_DATA floppy drive for Tajima ,but I don t know if is right model for you.
Is from TMFD machine,but has jumpers and can be set for different model.

Submitted by inkimprints on Wed, 01/04/2023 - 12:16

dgeorge wrote:
If your USB emulator is Richpeace you must create an image from software disk.
Put this image to USB stick and install.
On USB stick only software disk image.
I did this many times.

If your USB emulator is another brad,I don t know.
But you can try the same ,will not explode nothing.

I have an YE_DATA floppy drive for Tajima ,but I don t know if is right model for you.
Is from TMFD machine,but has jumpers and can be set for different model.

How do you create an image from the software disk?

My reader is Richpeace.

Thanks for the insight!

Submitted by dgeorge on Wed, 01/04/2023 - 13:18

YOU ARE LUCKY,WILL WORK !!
Need an image maker software.
I will check my files, I think I have one.
The problem is how to send to you,I don t think is possible by email

2025 © DigitSmith | Terms and Conditions | Privacy Policy | Contact