By Keithers on
Jan. 23, 2007
I have 2 Melco EM6 machines and I have a computer with software. How do I wire them all up to make them all work nicely together? The Melcos have serial and network connectors on the back. Do the Melcos each need a serial port or can I network them and the PC through a switch?
:confused:
Thank you
Re: Connecting Melcos to PC
If the EM6 is similar to the Amaya family, I think all you need to do is network them together with ethernet cables through an ethernet hub. Just beware that you cannot have your internet connection through the same hub. I am not sure what the ramifications are but I was told not to do it that way. Hope this helps.
Matt McNeill
JuBilee Screen Printing
& Embroidery
910-673-4240
Celebrating 20+ years in business!!!!!
If you have any questions, feel free to pm, email, or call me.:D
Re: Connecting Melcos to PC
Thank you for the info.
Re: Connecting Melcos to PC
You need a network card from Melco installed in your computer, and ENS software, which comes with Design Shop software. After you configure the network board, you connect the first machine to the network board in your computer, and then daisy chain each machine off the previous one.