Thread Machine BROTHER BAS-416

By razor on Aug. 26, 2014

I have bits and Pieces of a Instruction Manual for a BAS-416 is there any video that show from start to finish how to thread and set up the bobbin? I have the needles set up correctly to depth to 10.8 mm from center of bobbin..

Thanks RAZOR

Submitted by razor on Sat, 08/30/2014 - 10:15

Thanks do you have a video of your machine just want to make sure i did this correct the hook of the needle is pointed away from you ...needle tip 10.8mm from the center of bobbin holder now just wondering how to thread the bobbin to start embroidery does everything sound correct?

Thanks

Submitted by NSEMBROIDERY on Sun, 08/31/2014 - 04:09

We are on trade show this weekend. I can try to think about answers on Monday if that's ok for you. Take a look at the manual for while and I'm pretty sure that you may figure out something and I will get back to you after the weekend madness. You can download the manual at brother website.

Submitted by razor on Mon, 09/01/2014 - 15:53

NSEMBROIDERY wrote:
We are on trade show this weekend. I can try to think about answers on Monday if that's ok for you. Take a look at the manual for while and I'm pretty sure that you may figure out something and I will get back to you after the weekend madness. You can download the manual at brother website.

Thanks for the link I am looking at it Today

Submitted by razor on Tue, 09/02/2014 - 20:27

Alright I looked at the manual I made a gage over the weekend that is 21.6mm so that should work having trouble with the thread in the bobbin picking up. I think i have everything correct but i must be missing a small tip.

Thanks In Advance

Submitted by NSEMBROIDERY on Thu, 09/04/2014 - 07:25

Do you use Skype? My guess is that that we should talk and maybe I could show you the machine working. wash-ro is my Skype. I'm in Hawaii so probably a few hours earlier than you.

Submitted by razor on Thu, 09/04/2014 - 18:45

NSEMBROIDERY wrote:
Do you use Skype? My guess is that that we should talk and maybe I could show you the machine working. wash-ro is my Skype. I'm in Hawaii so probably a few hours earlier than you.

Will be gone for the weekend how about Monday evening?

Submitted by razor on Tue, 09/09/2014 - 16:57

gailkeys wrote:
Hi, you can easily get the BAS-416 video at You tube and lots of information on google.

I have looked but nothing showing me how to thread a needle unless i didnt see the video

Submitted by razor on Wed, 09/17/2014 - 17:58

NSEMBROIDERY wrote:
We can give a try, sure!

Would it be possible for you to take a small video and send it or post it on youtube or send it...I would be willing to compensate you for it

Thanks Todd

2025 © DigitSmith | Terms and Conditions | Privacy Policy | Contact