troubleshooting for my melco EMC6 !!

By sewcrazy on Jun. 01, 2006

hello all: i have a melco emc6 machine (built in the early 1800's, i believe!!) while i was sewing tonight, the power went out in my house. at that moment, the needle was down and i was backing up a few stitches in a design. now that power has been restored, the machine will power-up and then display the words "melco..." but won't allow me to select anything, everything seems to be frozen. (and the needle is still down) any suggestions!!?? thanks!

Submitted by Anonymous (not verified) on Tue, 07/18/2006 - 22:42

Hmmm... I guess nobody replied because they've never experienced what happened with your machine :( Hell I never experienced it either. I guess the only suggestion we can really give you is to get an embroidery tech to look at your machine.

Submitted by Anonymous (not verified) on Mon, 07/24/2006 - 09:53

If it was no plugged in a power surge bar maybe the circuit board was damaged. You definitely need a tech.

Submitted by keithwila on Wed, 11/04/2009 - 21:38

sewcrazy wrote:
hello all: i have a melco emc6 machine (built in the early 1800's, i believe!!) while i was sewing tonight, the power went out in my house. at that moment, the needle was down and i was backing up a few stitches in a design. now that power has been restored, the machine will power-up and then display the words "melco..." but won't allow me to select anything, everything seems to be frozen. (and the needle is still down) any suggestions!!?? thanks!

dose the control panel work

2025 © DigitSmith | Terms and Conditions | Privacy Policy | Contact