USED: Vastex LittleRed X3D Dual Zone Conveyor Dryer 54" x 7.4'

USED: Vastex LittleRed X3D Dual Zone Conveyor Dryer 54" x 7.4' for sale!

Price: $9,000 USD / best offer (buyer handles shipping)

The multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.

This dryer features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149°C) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.

The 54 in. (137 cm) wide LittleRed X3-D-54 model cures 720+ plastisol-printed garments/hr, 370+ water-based or discharge-printed garments/hr, and 103+ garments/hr inkjet printed with digital white ink or pretreated for DTG printing at 3 minutes dwell time.

This model comes with a powered exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as to cool the skin and controls. The conveyor length is 66 in. (168 cm), with a low friction belt aligner and belt speed controls to precisely set dwell times from 35 seconds up to four minutes.

FLEXIBLE
- Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time

POWERFUL
- 240V/8,900 total wattage

DEPENDABLE
- Industry-leading 15-year heater warranty

EFFICIENT
- Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing

CONSISTENT
- Low friction belt aligner and DC belt speed control with digital display

HEAVY DUTY
- "X-Series" Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor

ACCURATE
- Dual digital PID Temperature controller is accurate to +/-1°F

ADJUSTABLE
- 2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater

EXHAUST
- High powered exhaust to remove fumes and moisture

FAST
- 720+ garments/hr for plastisol inks
- 370+ garments/hr for water-based or discharge inks
- 103+ garments/hr for DTG digital white ink @ 3 minutes